-
Your shopping cart is empty!
Builders Film
Description
Builders film is manufactured using a mixture of polyethylene
virgin resins and high quality recycled resins. The result is a strong, durable
and tear-resistant film specifically manufactured to provide a vapour barrier
between your concrete slab and the soil below.
This barrier
prevents moisture from working its way through your slab and into your
foundations and walls.
Builders
film must be installed in accordance with Australian Standard 2870/1996, please
also see ‘Installation Instructions’
below.
Due to the mixture used to manufacture Builders film it is much more environmentally friendly than many other films available as all wastage is fully recyclable.
Various uses
˚Concrete
underlay or vapour barrier
˚Drop sheet
for painting
˚Grain silo,
pond or dam lining
˚Temporary
protection from weather for renovations
˚Due to the easy to use nature of builders film many there are many other uses which makes it a terrific value for money product for both the DIY and professional tradesman
Installation Instructions
Builders film must always be installed in accordance with AS
2870. Concrete is used for construction slabs and footings due to its
compression strength however moisture can permeate through its mass and into
the construction above if these standards are not followed.
The construction site must be properly prepared and the film must be carefully laid with all joints to be taped using a quality 48mm PVC Duct Tape allowing no less than 200mm overlap of film. To ensure maximum protection from moisture penetration Builders Film should be as clean, dust free and dry as possible whilst taping. Please check guidelines in the Australian Standard for your specific ‘site type’ to ensure you are in accordance with this standard.
Disclaimer
Please note
this Technical Data Sheet is recommended as a guide only and PolyPlus Solutions
Pty Ltd do not accept any liability for losses suffered from any information
provided or from the incorrect use of this product.